Integrated Prefabricated Pump Station
Integrated Prefabricated Pump StationTwo types of screen are generally used: basket screens and grinder screens. What they have in common is that both intercept debris at the inlet of the integrated prefabricated pump station to prevent large amounts of large debris from clogging the submersible sewage pumps and pipes. The difference is that when a basket screen has collected a lot of debris, it must be lifted manually along a rail with a hoist chain and emptied; otherwise too much debris will reduce inlet flow. Put simply, it is like the strainer basket in a kitchen sink. A grinder screen, on the other hand, is electrically driven. Once installed at the inlet, it starts automatically at fixed intervals: as the drum rotates it carries debris to the central cutters, which shred it into small particles that flow with the water to the bottom of the integrated prefabricated pump station and are discharged by the submersible sewage pumps. This saves staff from frequently visiting the pump station to check the screen basket. As a result, grinder screens cost considerably more than basket screens.
Every integrated prefabricated pump station project is different. When deciding between a basket screen and a grinder screen, the design institute usually considers the operating environment of the project when drawing up the design. If the project will produce a lot of debris that is bulky or hard to handle, and manual cleaning is impractical, a grinder screen is chosen. If the project handles pure sewage or stormwater with almost no debris, the design institute will consider a basket screen to save costs.
Back


