Brief Introduction to Grinder Bar Screens
The grinder bar screen is a debris-removal device introduced to China from abroad for use in buried municipal, water conservancy and pump station systems.
Building buried pump stations reduces the impact of sewage pump stations on the surrounding environment; for example, odors and bacteria are suppressed to the greatest extent.
It is mainly used in drainage pump stations, including sewage and stormwater pump stations, and is the ideal match for buried integrated prefabricated pump stations. It solves the problem of excess debris clogging the pumps and avoids the inconvenience of regular manual cleaning required with basket screens, making it the guardian angel of the pump station. Grinder screens can also be considered for drainage pipes in new residential communities to prevent occasional kitchen waste from clogging the pipes.
Working Principle
The grinder screen consists of several parts
1. Drive section
Amphibious motors; twin-motor or triple-motor models can be selected according to channel width and treatment capacity;
2. Grinding section
Two shafts drive intermeshing cutters that rotate to shred debris. The cutters are the most important part, with very high requirements for hardness and workmanship; only imported cutters are relatively reliable;
Screen section
This section blocks large debris. To avoid excessive head loss, a gap of about 20 mm is recommended. The screen section, also called the drum, contains continuously rotating rakes that push debris into the grinding section. Single-drum and double-drum versions are available, selected according to flow and channel width.
The whole unit is driven by 2 or 3 motors that run the grinding and screen sections respectively, completely replacing old-style rotary screens.
Technical Features
1. One-piece design: compact equipment with flexible structure and installation options to suit channels of many sizes.
2. Low-speed operation with low power consumption and little wear; differential-speed cutters enhance the tearing of debris.
3. Special cutter design with excellent self-cleaning ability, so there is no tangling or debris buildup.
4. Rational transmission structure makes cutter replacement easy and maintenance simple, lowering repair costs.
5. A reliable protection system is required to effectively protect the equipment from damage when overloaded.
Usage Notes
The grinder bar screen has two key components:
1. The cutters, which determine the unit's treatment performance and service life and depend heavily on tooth arrangement, heat-treatment hardness and working clearance.
2. The motor. Grinder screens sometimes have to work submerged, so the motor must be suitable for both dry and wet operation, with proper waterproofing for long-term use under such conditions.
Researchers at several design institutes and testing bodies have made a comprehensive comparison between this new type of equipment and the traditional equipment used in China, and generally agree that: first, the drive of a traditional rotary screen sits above the main sewage channel, requiring a pump house and control room, taking up a lot of space and involving extensive civil works; second, traditional equipment needs auxiliary equipment such as screw conveyors and presses, which not only raises equipment costs but also requires large power capacity and consumes a lot of energy; third, the large amount of intercepted debris must be removed manually or with special machinery and then hauled away by a constant stream of vehicles, creating secondary handling of pollutants with a heavy, difficult workload; fourth, the screening equipment and pump station must be manned and operated around the clock, with high responsibility, intensive labor and many staff; fifth, the screening equipment and pump station operate in the open, and the sewage and debris release large amounts of toxic and harmful gases, polluting the air.
Back


