What Does an Integrated Prefabricated Pump Station Consist Of?

     An integrated prefabricated pump station consists of the shaft structure, internal facilities and other facilities. The main body comprises the ventilation system, shaft, discharge piping, valves, inlet piping, control cabinet, service platform and pumps;
The station's working temperature should be -20 °C to 40 °C. The shell is made of GRP or high-density polyethylene, and internal piping and fittings are made of stainless steel or other corrosion-resistant materials. The conveyed medium should have a temperature of 0 °C to 40 °C and a pH of 4-10, and the largest particles in the medium must be smaller than the passage of the pumps fitted;

    The station's base slab should be reinforced concrete, firmly connected to the station's base. For stations with a shaft diameter over 3 m, reinforcement and secondary grouting should be used to connect the slab to the station base;
    The station is equipped with submersible pumps that operate without vibration or cavitation within the design range; the pumps should come with a motor cooling system;
    Wet-well stations should have natural ventilation with vent pipes at least 100 mm in diameter. Dry-well stations use mechanical ventilation such as axial fans, with enough airflow to dissipate heat from the equipment; temperature control and alarm devices should be installed in the shaft;

Back

Product Categories

Contact Us

Address: Liujin Road, Sitaizi Industrial Park, Bayuquan District, Yingkou, Liaoning, China

Contact: Mr. Li Chuanyi +86 138 4076 5457

Technical Service: Mr. Song (Engineer) +86 183 0417 8511

Factory Tel: 0417-2267160

E-Mail: 113329659@qq.com
xygs66888@163.com

Xiyuan