Uses and Working Principle of Grinder Bar Screens
Grinder bar screens shred wood chips, empty bottles, rags and other debris in the sewer network to protect the other equipment in the pump station and keep it running normally. Building buried pump stations reduces the impact of sewage pump stations on the surrounding environment; for example, odors and bacteria are suppressed to the greatest extent.
It is mainly used in drainage pump stations, including sewage and stormwater pump stations, and is the ideal match for buried integrated prefabricated pump stations. It solves the problem of excess debris clogging the pumps and avoids the inconvenience of regular manual cleaning required with basket screens, making it the guardian angel of the pump station. Grinder screens can also be considered for drainage pipes in new residential communities to prevent occasional kitchen waste from clogging the pipes.
The grinder screen consists of several parts
1. Drive section
Amphibious motors; twin-motor or triple-motor models can be selected according to channel width and treatment capacity;
2. Grinding section
Two shafts drive intermeshing cutters that rotate to shred debris. The cutters are the most important part, with very high requirements for hardness and workmanship; only imported cutters are relatively reliable;
3. Screen section
This section blocks large debris. To avoid excessive head loss, a gap of about 20 mm is recommended. The screen section, also called the drum, contains continuously rotating rakes that push debris into the grinding section. Single-drum and double-drum versions are available, selected according to flow and channel width.
The whole unit is driven by 2 or 3 motors that run the grinding and screen sections respectively, completely replacing old-style rotary screens.
Back


