GRP Shaft Manufacturing Equipment

     A GRP shaft manufacturing device includes a front support, a rear support and, between them, a winding mold for making the GRP shaft. The rear support has a support position for holding the winding mold and a storage position for receiving the formed GRP shaft so it can be removed during demolding. The winding mold has a support arm extending from the end near the rear support, which takes over support from the rear support during demolding, and is also provided with at least one support mechanism that supports the winding mold in place of the support arm when the formed GRP shaft is moved onto the arm. During demolding, the support arm replaces the rear support in supporting the winding mold; when the formed GRP shaft moves onto the support arm, the support mechanism supports the winding mold. With this GRP shaft manufacturing device, the winding mold always has two support ends during demolding, so it is unlikely to be damaged or deformed by excessive loads. 

Back

Product Categories

Contact Us

Address: Liujin Road, Sitaizi Industrial Park, Bayuquan District, Yingkou, Liaoning, China

Contact: Mr. Li Chuanyi +86 138 4076 5457

Technical Service: Mr. Song (Engineer) +86 183 0417 8511

Factory Tel: 0417-2267160

E-Mail: 113329659@qq.com
xygs66888@163.com

Xiyuan