Self-Cleaning of Prefabricated Pump Stations
The bottom of the prefabricated pump station shaft has an intelligent concave structure specially designed using CFD. This unique hydraulic design ensures the shaft can withstand groundwater pressure without deforming. When the pumps start, the sloped structure of the pump pit accelerates the medium in the pit to high velocity, creating strong vortices. On one hand, the bottom flow is concentrated toward the pump inlets, helping the pumps convey shredded debris; on the other, it drives the movement of impurities that have settled at the bottom of the integrated prefabricated pump station, preventing sedimentation so that settled solids are resuspended and enter the pump inlets, achieving a self-cleaning effect.
The external structure of the integrated prefabricated pump station remains unchanged. To address sedimentation during use, the station's piping structure has been optimized: a side branch is added to the main pump discharge pipe inside the station. The added branch consists of one or more small-diameter pipes whose outlets are aimed at the points in the shaft where sediment tends to build up. An electric valve is installed between the side branch and the main pipe, with its electrical control connected to the station's control cabinet system, which is linked to the pump control system.
When the station's pumps start and run, the control program opens the electric valve on the side branch, and part of the pressurized flow in the main discharge pipe passes through the branch. Because the branch is narrow, the pressurized water becomes a high-velocity jet that scours the areas of the shaft where sediment tends to settle. Under this repeated scouring, and as the pumps run, impurities deposited in the station are conveyed out of it. Depending on the station's specific operating conditions, the opening, closing and interval of the electric valve can be adjusted intelligently in the control system.
Back


