A Sewage Lift Pump Station Manufacturer Explains

The use of sewage lift pump stations has solved the environmental problems caused by sewage stagnating for long periods and eased the pressure of urban environmental management. Traditional sewage pump stations were made of concrete; after years of development in production and technology, today's sewage pump stations are integrated prefabricated pump stations made of GRP. These stations have many advantages, such as high integration, small size, easy installation and strong environmental adaptability.

Construction: Concrete pump stations are extremely heavy, so installation requires coordination between the supplier and the civil contractor and a large space reserved for installation, which inevitably lengthens the installation period. Their excessive weight also makes transport very difficult. In addition, as reinforced concrete structures, the base slab, walls and roof must be built in stages, and pouring and curing alone take 2-3 months. GRP integrated prefabricated pump stations are highly integrated and made of lightweight materials, which not only eases transport but also means that once the pit is excavated and the base slab precast, the amount of construction work is small and the construction period short; installation can generally be completed within a week.
Control system: Traditional concrete pump stations need a dedicated control room and dedicated staff to manage it, adding to later management costs. GRP integrated prefabricated pump stations use an intelligent management system that monitors the station's operating status automatically, with no need for staff on duty, making them convenient to use and reducing costs.
Well-matched components: The parts used to build and assemble traditional concrete pump stations often come from different brands, so the finished product is poorly matched and unstable. GRP integrated prefabricated pump stations are assembled entirely by the manufacturer, so all parts are well matched, reducing the possible failure rate when the system is running.
Service life: The concrete of traditional pump stations is porous and can react with gases and acidic biomass in the soil, making it prone to corrosion, leakage and cracking. GRP integrated prefabricated pump stations are corrosion-resistant and have excellent toughness to resist leakage and cracking.
Environmental suitability: Concrete easily suffers corrosion, leakage and cracking due to unstable ground and soil acidity or alkalinity. GRP integrated prefabricated pump stations are highly corrosion-resistant and undergo anti-leakage pressure treatment before leaving the factory, making them 100% corrosion-proof, leak-proof and crack-proof.
Noise: The design concept of integrated prefabricated pump stations and their high-quality pumps ensure very low noise in operation, so they can be installed with confidence in densely populated residential areas, commercial buildings and other places with high environmental requirements. The starting, stopping and running of pumps in traditional concrete pump stations produce considerable noise, affecting the surroundings.
Installation requirements: Prefabricated pump stations can be installed in many locations, such as outdoors, in green belts and under roads. They have particular advantages where the work area is small, population density is high and buildings are concentrated, and their initial cost and later maintenance costs are low. Traditional pump stations need open construction space; building them on roads or in residential areas requires careful consideration of traffic and other issues, and their initial and maintenance costs are higher.

Back

Product Categories

Contact Us

Address: Liujin Road, Sitaizi Industrial Park, Bayuquan District, Yingkou, Liaoning, China

Contact: Mr. Li Chuanyi +86 138 4076 5457

Technical Service: Mr. Song (Engineer) +86 183 0417 8511

Factory Tel: 0417-2267160

E-Mail: 113329659@qq.com
xygs66888@163.com

Xiyuan