The Many Advantages of Integrated Pump Station Manufacturers Are Recognized by Users!

1) The integrated pump station shaft is made of GRP by machine filament winding, taking full account of geological survey, structural mechanics, hydraulic conditions and other factors.

2) The station is a wet-well type, with pumps installed on guide-rail couplings. Pumps and valves are integrated in the same shaft, with an internal maintenance platform made of galvanized steel.

3) The station has a self-cleaning CFD design to ensure no adverse hydraulic phenomena occur. Design and manufacturing requirements for integrated pump station systems

4) Automatic pump pit flushing system: to reduce sludge and debris settling at the bottom of the pump pit and to flush and clean the pit automatically, the pumps must be fitted with flushing valves. The flushing valve is mounted on the volute via a matching flange and flushes sediment from the pit floor. Based on the jet principle, it operates automatically and briefly rather than continuously, for 20-40 seconds (adjustable) at the start of pumping, triggered by the pump's flow and pressure, without the need for a mixer or other electrical components.

5) Submersible sewage pumps must be capable of continuous and intermittent operation without any harmful effects on the pumps. Insulation class H (180 °C). Within its design load range, the pump unit must run smoothly without vibration or cavitation. All rotating parts of the pump (including the motor) must be statically balanced during manufacture and dynamically balanced at rated speed after assembly. Pump operating noise must be below 80 dB.

6) Internal piping, guide rail systems, lifting chains, brackets, vent pipes and all fasteners must be at least SS304.

7) The station control includes scum and pit-floor cleaning functions to minimize maintenance work.

 

Back

Product Categories

Contact Us

Address: Liujin Road, Sitaizi Industrial Park, Bayuquan District, Yingkou, Liaoning, China

Contact: Mr. Li Chuanyi +86 138 4076 5457

Technical Service: Mr. Song (Engineer) +86 183 0417 8511

Factory Tel: 0417-2267160

E-Mail: 113329659@qq.com
xygs66888@163.com

Xiyuan