Prefabricated Pump Stations: Collecting Status Data for the Hongqi Canal Restoration Is Difficult

Built between the 1970s and 1990s, the Hongqi Canal is one of the two main drainage systems in Changsha's urban area and has long carried the city's main sewage load. After years of neglect, the canal has aged badly, and without timely "treatment" it will no longer be able to collect sewage. Changsha plans to repair and reinforce nearly 10 km of the canal's main channel and has selected a 130 m section at Xiaoyuan Park for trials to choose the best approach.

  The Hongqi Canal catchment covers the old town north of Puyuan Road, west of Chaoyang Road and Chezhan Road, south of the Liuyang River and east of Furong Road. According to the site construction manager, the canal has collapsed several times in recent years, posing hidden structural safety risks, so repair and reinforcement are urgent. Because the canal lies in the old town and is buried more than 4 m deep, excavation is not possible and the work must be done using trenchless methods.

  On the morning of January 19, in the Hongqi Canal culvert 5 m below Xiaoyuan Park, dozens of workers were busy repairing and reinforcing the canal, working in 4 separate sections. An official from the Changsha Public Works Construction Center said the trial section would test different construction methods and select the right approach for the canal's different conditions, so as to eliminate its safety hazards completely. The main works on the trial section are expected to be completed before this year's Spring Festival.

  According to the official, there are currently few comparable projects in China to learn from, and no mature standards for reinforcement and repair methods, cost standards for different methods or technical experience to rely on. Once completed, the trial section will not only provide a basis for repairing and reinforcing the entire main channel of Changsha's Hongqi Canal, but also fill a research gap at home and abroad, offering a scientific basis and reference for building, operating and managing sewers and sewage channels in other Chinese cities.

  In the trial section, the contractor, Hunan Daxing Reinforcement and Renovation Engineering, introduced digital 3D reverse BIM technology for the first time, providing reliable data for precise repair and reinforcement of the canal.

  "Because the original records are missing, obtaining current data for the Hongqi Canal repair is very difficult; without data, design cannot proceed and costs cannot be controlled precisely," the technical lead said. In the past, such data was collected by manual surveying and on-site photography, which were inefficient, involved a lot of repeated work, were costly and made it hard to monitor the canal's operation comprehensively and in real time. With digital 3D reverse BIM technology, the design and construction teams can collect data efficiently and accurately, providing a true and reliable basis for reinforcing and repairing the entire canal.

  According to the official, digital 3D laser scanning is another technological innovation in engineering surveying after GPS, RS and GIS. It scans 3D point cloud data of object surfaces with high efficiency and precision, producing 3D models and virtual reconstructions of complex real environments, and is widely used in urban planning, old-town renovation, cultural districts and the protection of historic buildings.

  The technology was used for the first time in the Hongqi Canal reinforcement and repair project. In the inspection and design phase, combined with drone oblique photography modeling, a digital 3D BIM model was built, providing accurate data on the canal's full route, structural defects and cover depth for inspection and design, and enabling accurate design cost estimates. In the construction phase, the site was digitally modeled to provide an original record for post-completion restoration. The digital model data can be retained, enabling management of the entire canal and improving the city's resilience.

  The Hongqi Canal reinforcement and repair project is the first use of digital 3D reverse BIM technology in the renovation of Changsha's old municipal works, providing reliable, precise data for building a high-quality "Beautiful Changsha", and is being connected as a "subsystem demonstration project" of the smart city information system. The Public Works Center will strictly follow the "four precisions and five haves" requirements and the three-year "Beautiful Changsha" action plan, innovating its ideas and models and accelerating project implementation to create a new model for "Beautiful Changsha" that can be replicated and promoted.

Back

Product Categories

Contact Us

Address: Liujin Road, Sitaizi Industrial Park, Bayuquan District, Yingkou, Liaoning, China

Contact: Mr. Li Chuanyi +86 138 4076 5457

Technical Service: Mr. Song (Engineer) +86 183 0417 8511

Factory Tel: 0417-2267160

E-Mail: 113329659@qq.com
xygs66888@163.com

Xiyuan