What Factors Affect the Filtration Performance of Integrated Pump Stations?

Regarding the effluent quality of integrated sewage treatment equipment, these issues need attention when using fully automatic integrated equipment. Improper operation and inadequate routine maintenance will affect the equipment's performance and hence effluent quality, so proper operation and maintenance of fully automatic integrated sewage treatment equipment is essential.

Temperature: during filtration, if the suspension temperature is low, viscosity is high and filtration is slow. Liquid viscosity is an exponential function of temperature and falls significantly as temperature rises. Raising the temperature is the simplest and most effective way to reduce viscosity, but excessive temperatures easily oxidize oils and fats, so crude oil filtration is usually kept below 70 °C. Operating pressure: most impurities in crude oil are incompressible, so higher pressure gives a faster filtration rate. However, if the suspended solids in the oil are colloidal, the voids in the filter cake shrink as pressure increases, filtration resistance gradually rises and filtration speed drops rapidly, so pressure must be set according to conditions. Suspension concentration: at high concentrations there is more residue, shortening the effective filtration time in each cycle of batch production and reducing output. For continuous vacuum filters, however, higher concentrations produce a more even filter cake that is easy to clear promptly, with little effect on output.      

 

Back

Product Categories

Contact Us

Address: Liujin Road, Sitaizi Industrial Park, Bayuquan District, Yingkou, Liaoning, China

Contact: Mr. Li Chuanyi +86 138 4076 5457

Technical Service: Mr. Song (Engineer) +86 183 0417 8511

Factory Tel: 0417-2267160

E-Mail: 113329659@qq.com
xygs66888@163.com

Xiyuan