What Are the Features of Integrated Prefabricated Pump Stations?

Generally, traditional pump stations have strict planning and construction requirements, and each station has its own needs. Integrated pump stations also require manpower and station managers. Maintenance of power supply and distribution equipment, integrated pump station units and so on should be checked regularly, and valves must not be allowed to rust. When an integrated pump station is in operation, any hidden operational problems should be reported promptly. An integrated pump station consists of an integrated buried prefabricated pump station, prefabricated at the factory to the customer's specific requirements.

 

  This ensures the system's cost-effectiveness and operational reliability to a certain extent. There are many successful examples in urban stormwater control and sewage collection and treatment, and integrated pump stations are an ideal replacement for traditional sewage pump stations. As for the pump at the core of the integrated pump station, there is still a considerable gap between domestic and foreign pumps, especially in the more critical chemical pumps, so limitations in pump technology directly restrict the development of integrated pump stations in many ways. The main technical difficulties are power, heat and noise. Under the same working conditions, Chinese pumps tend to have higher power, which does not meet energy-saving and emission-reduction requirements, and generate more heat, shortening pump life; at higher speeds they are generally also noisier, and China's noise reduction technology still needs to improve.

 

  The integrated prefabricated pump station is a new type of buried automatic sewage collection and lifting system. It is easy to install, reliable in quality, requires little civil work, occupies little land and is highly automated; it is a replacement for traditional concrete lift stations, distinguished by high integration and optimized volume. The shaft of the integrated pump station is customized to the data, including pumps, screens, piping, valves, exterior, control equipment and maintenance equipment. An integrated pump station provides water with potential and pressure energy, serving as the power source for irrigation, drainage, water supply and water resource allocation where gravity flow is not possible. It is buried, and its main body consists of the shaft, submersible pumps, lifting chains, piping, valves, level sensors, control system, basket screen and ventilation system.

 

  The shaft of the integrated prefabricated pump station is made of reinforced GRP, polyethylene resin or corrosion-protected Q234 carbon steel. The internal pumps, piping, valves, instruments, control equipment, ladders and any other accessories the user requires are supplied as a complete set and installed before the whole unit leaves the factory; a maintenance room and grinder screen can also be supplied. It is a new type of integrated pump station that is convenient to use, reliable in quality, requires little civil work and costs relatively little. Its notable feature is an optimized effective volume design, and it can replace concrete pump stations. Integrated sewage pump stations are used more and more.

What Are the Features of the Integrated Pump Station?

  This can be seen everywhere from farmland irrigation to sewage discharge to sponge city construction. Integrated prefabricated pump stations will make their own contribution to sewage treatment! The control system of an integrated pump station is like the human brain, coordinating the work of all components within the station. Because China started late in semiconductor electronics and has a weak technical foundation, its technology lags far behind the Western semiconductor industry.

 

  Fortunately, we have recognized this shortcoming and are working hard to catch up; we believe that before long China will have its own core control systems. When the level reaches the set pump start level, the control system starts the pumps, and sewage is pumped from the station to the municipal sewer outlet; when the level falls below the set level, the system stops the pumps, and the cycle repeats.  

 

  The body of the integrated prefabricated pump station is made by machine filament winding of glass fiber into a cylindrical shape, with the shaft diameter and height determined by the volume of sewage the project needs to handle.

 

  The integrated prefabricated pump station shaft has an inlet and an outlet, each connected to the pipe network. Sewage or stormwater flows by gravity through municipal pipes into the GRP shaft, which contains a pressure sensor or level sensor system. When the level reaches a certain height, the sensor sends a signal to the control system, which starts the submersible sewage pumps.

 

  As for the station shell: although China now produces all the station materials itself, costs are still relatively high, and apart from large projects pump stations are not yet used in many places. Rapid adoption therefore depends on solving the cost problem of integrated pump stations; we believe that once this is solved, integrated pump stations will enter a new period of growth.

 

Back

Product Categories

Contact Us

Address: Liujin Road, Sitaizi Industrial Park, Bayuquan District, Yingkou, Liaoning, China

Contact: Mr. Li Chuanyi +86 138 4076 5457

Technical Service: Mr. Song (Engineer) +86 183 0417 8511

Factory Tel: 0417-2267160

E-Mail: 113329659@qq.com
xygs66888@163.com

Xiyuan