Prefabricated Pump Stations Are Increasingly Widely Used Thanks to These Features

 

GRP prefabricated pump stations are widely used in municipal engineering, industry and any building where wastewater cannot be discharged directly to the sewage treatment system by gravity. In municipal drainage they are suitable for sewage pump stations, drainage pump stations, combined pump stations and other intermediate pump stations. Liquids: urban sewage, stormwater, drainage water, wastewater and raw water. Liquid temperature below 40 °C, pH between 4 and 10.

  Working principle:

  A pressure sensor or float sends the station's level information to the control system, which switches the pumps on and off according to its set operating parameters. When the level reaches the set pump start level, the control system starts the pumps, and sewage is pumped from the GRP prefabricated pump station to the municipal sewer outlet; when the level falls below the set level, the system stops the pumps, and the cycle repeats.

  High-performance submersible sewage pumps run smoothly without vibration or cavitation within the design load range. All rotating parts of the pumps (including the motors) undergo dynamic and static balancing tests during manufacture, and pump operating noise is below 80 dB(A). The internally installed submersible sewage pumps are fitted with discharge bends, auto-coupling bases, and stainless steel guide rails and lifting chains that connect them when moving and seating automatically. Guided by the rails, the pumps slide freely between the top of the pit and the auto-coupling base. The seal between pump and coupling base is metal-to-metal, supplemented by a rubber ring. Compact, yet with excellent usable effective volume; highly integrated, truly all-in-one.

  Buried installation of GRP prefabricated pump stations: once installed, they do not affect the surrounding environment and landscape. The short installation period saves most of the cost, and maintenance saves time and effort. With a one-off investment, long-term operating costs are low and energy savings are significant; in case of demolition or land acquisition, the station can be lifted out and buried again elsewhere for reuse. Fully customized: for each project, stations can be designed with different diameters, heights and inlet/outlet positions to meet the needs of all kinds of sites.

  Analysis of the three main features of GRP prefabricated pump stations:

  Integration: the equipment has an integrated all-in-one structure, with no need to build a new sewage tank, a small footprint and low investment.

  Solid-liquid separation: debris is completely separated from the sewage so the impeller never comes into contact with it; tangling material and hard objects are kept away, ensuring a normal operating environment for the pump, greatly extending its life and reducing repairs.

  Backwashing: using the pump's pressure and based on precise hydraulic model calculations, debris retained in the solid-liquid separator is backflushed and discharged to the municipal network. At the same time, a stream of water under pump pressure backwashes the bottom of the tank, leaving sludge in the sewage nowhere to hide as it is discharged with the flow to the external network.

Back

Product Categories

Contact Us

Address: Liujin Road, Sitaizi Industrial Park, Bayuquan District, Yingkou, Liaoning, China

Contact: Mr. Li Chuanyi +86 138 4076 5457

Technical Service: Mr. Song (Engineer) +86 183 0417 8511

Factory Tel: 0417-2267160

E-Mail: 113329659@qq.com
xygs66888@163.com

Xiyuan